All Courses

OSHA 10-Hour Construction This 10-hour course, developed by the Occupational Safety and Health Administration (OSHA), focuses on safety and health hazards specific to the construction industry. It provides essential training for construction workers, equipping them with the knowledge to identify, avoid, and prevent workplace hazards. Key Topics:<ul><li>Introduction to OSHA and workers' rights</li><li>Focus Four hazards (falls, electrocution, struck-by, caught-in/between)</li><li>Personal protective equipment (PPE)</li><li>Health hazards in construction</li><li>Excavations</li><li>Scaffolds and ladders</li><li>Hand and power tools</li><li>Material handling</li><li>Stairways and emergency procedures</li><li>Cranes, derricks, and hoists</li></ul> Course Highlights:<ul><li>OSHA-authorized curriculum and instructors</li><li>Real-world construction site scenarios and discussions</li><li>Emphasis on practical application of safety principles</li><li>Official OSHA 10-Hour Construction course completion card</li></ul> This course is essential for workers new to construction and experienced workers needing a refresher. Participants will develop a solid understanding of construction safety practices, contributing to a safer work environment and OSHA compliance. **** Please note: This class requires a minimum of 3 participants per OSHA. If 3 participants are not registered at least 48 hours prior to the course starting an e-mail will be sent to the 1-2 participants to inform them that the class will not run. Once 3 participants are registered all participants will be informed that the class has reached minimum capacity and will go ahead as scheduled.****

Wells Fargo Building

OSHA 10 - Construction Industry

American Red Cross Adult and Pediatric First Aid/CPR/AED Skills Session This essential skills session provides hands-on practice and evaluation for either the American Red Cross Basic Life Support (BLS) or Adult and Pediatric First Aid/CPR/AED certification. Designed as a critical complement to the online theoretical training, this in-person session allows participants to demonstrate and refine their life-saving skills under the guidance of certified instructors. Key Skills Covered:<ul><li>High-quality CPR for adults, children, and infants (including use of an AED)</li><li>Choking relief for conscious and unconscious victims</li><li>Proper use of barrier devices</li><li>Scene assessment and victim evaluation</li><li>First aid techniques for various injuries and sudden illnesses</li></ul> Session Highlights:<ul><li>Hands-on practice with CPR manikins and AED trainers</li><li>Real-time feedback from experienced instructors</li><li>Scenario-based learning to simulate real emergencies</li><li>Small group settings for personalized attention</li><li>Skills evaluation required for course completion and certification</li></ul> This skills session is crucial for healthcare providers, first responders, and individuals seeking BLS certification, as well as for anyone wanting to be prepared to respond to emergencies in their workplace, community, or home. Participants will gain confidence in their ability to apply life-saving techniques effectively in real-world situations. Note: Completion of the corresponding online theoretical course is required prior to attending this skills session. Upon successful demonstration of skills, participants will receive their American Red Cross certification valid for two years.

Adult and Pediatric First Aid/CPR/AED Skills Session

OSHA 10-Hour General Industry This essential 10-hour course, developed by the Occupational Safety and Health Administration (OSHA), provides a comprehensive overview of general industry safety and health hazards. Designed for entry-level workers and supervisors across various industries, this course lays the foundation for understanding workplace safety regulations and best practices. Key Topics:<ul><li>Introduction to OSHA and workers' rights</li><li>Walking and working surfaces</li><li>Emergency action plans and fire safety</li><li>Electrical safety</li><li>Personal protective equipment (PPE)</li><li>Hazard communication</li><li>Materials handling</li><li>Machine guarding</li><li>Industrial hygiene</li><li>Bloodborne pathogens</li></ul> Course Highlights:<ul><li>OSHA-authorized curriculum and instructors</li><li>Interactive discussions on real-world safety scenarios</li><li>Practical examples relevant to various industrie</li><li>Group activities to reinforce learning</li><li>Review of case studies illustrating the importance of safety practices</li><li>Opportunities to ask questions and clarify OSHA standards</li></ul> This course is essential for workers in manufacturing, warehousing, distribution, healthcare, and other non-construction industries. It provides crucial knowledge for recognizing, avoiding, and preventing safety and health hazards in the workplace. Upon successful completion, participants will receive an official OSHA 10-Hour General Industry course completion card, valid for life. This widely-recognized credential demonstrates a foundational understanding of occupational safety and health in general industry settings. Note: While this course provides a valuable overview of workplace safety, it does not fulfill specific training requirements for certain tasks or industries. Employers are responsible for providing any additional specialized training required for their specific workplace hazards.

OSHA 10 - General Industry

Tool Safety and Proper Usage This focused 4-hour course provides essential training on the safe use, maintenance, and storage of various hand and power tools commonly used in workplaces. Designed for construction workers, maintenance personnel, manufacturing employees, and anyone who regularly uses tools in their work, this course equips participants with the knowledge and skills to prevent tool-related accidents and injuries. Key Topics:<ul><li>Common hazards associated with hand and power tools</li><li>Proper use and handling techniques for various tools</li><li>Tool maintenance, inspection, and storage practices</li><li>Selection and use of appropriate personal protective equipment (PPE)</li><li>Ergonomic principles in tool selection and use</li><li>OSHA regulations related to tool safety</li><li>Emergency procedures for tool-related incidents</li></ul> Course Highlights:<ul><li>Hands-on demonstrations with various hand and power tools</li><li>Interactive exercises in identifying tool-related hazards</li><li>Practical sessions on tool inspection and maintenance</li><li>Guided practice in selecting and using appropriate PPE</li><li>Group activities in recognizing ergonomic issues in tool use</li><li>Case studies analysis of tool-related accidents and prevention strategies</li><li>Simulated scenarios for applying safe tool use practices</li></ul> This course is vital for professionals in construction, manufacturing, maintenance, and any industry where hand and power tools are regularly used. Participants will gain crucial skills to use tools safely, implement effective maintenance practices, and recognize and mitigate tool-related hazards. Upon completion, participants will be able to confidently select, use, and maintain various tools, apply appropriate safety measures, and contribute to a safer work environment through proper tool handling and storage practices.

Tool Safety

Scaffolding Safety and Proper Use This intensive 6-hour course provides essential training on the safe use, erection, and dismantling of scaffolding systems. Designed for construction workers, supervisors, safety managers, and anyone involved in scaffold work, this course equips participants with the knowledge and skills to prevent accidents and injuries related to scaffold use while ensuring compliance with OSHA standards. Key Topics:<ul><li>Types of scaffolds and their components</li><li>OSHA's Scaffolding standard (29 CFR 1926 Subpart L)</li><li>Common hazards associated with scaffold use</li><li>Proper scaffold erection and dismantling procedures</li><li>Fall protection measures for scaffold work</li><li>Load capacity and proper material storage on scaffolds</li><li>Scaffold inspection techniques and requirements</li><li>Special considerations for aerial lifts and suspension scaffolds</li></ul> Course Highlights:<ul><li>Hands-on practice with scaffold components</li><li>Interactive exercises in identifying scaffold hazards</li><li>Practical demonstrations of basic scaffold assembly</li><li>Guided sessions on implementing fall protection on scaffolds</li><li>Group activities in conducting scaffold inspections</li><li>Case studies analysis of scaffold-related incidents</li><li>Simulated scenarios for hazard identification in scaffold use</li></ul> This course is vital for professionals in construction, maintenance, and any industry where scaffolding is used. Participants will gain crucial skills to erect and use scaffolds safely, implement effective fall protection measures, conduct thorough inspections, and maintain compliance with OSHA regulations. Upon completion, participants will be able to confidently identify scaffold components, recognize and mitigate scaffold-related hazards, demonstrate proper erection and dismantling techniques, and contribute to a safer work environment in scaffold operations.

Scaffolding

Risk Management for Workplace Safety This intensive 6-hour course provides a thorough overview of risk management principles and their application to workplace safety. Designed for safety professionals, managers, supervisors, and those involved in occupational health and safety programs, this course equips participants with the knowledge and skills to effectively identify, assess, and control workplace risks using various techniques and industry standards. Key Topics:<ul><li>Fundamentals of risk management and its role in workplace safety</li><li>Risk assessment techniques and tools (FMEA, Bow-tie analysis, HAZOP)</li><li>Development and implementation of risk control measures</li><li>Application of risk management standards (ANSI Z10, ANSI Z590.3, ANSI Z690, ISO 12100)</li><li>Integration of risk management into safety management systems</li><li>Human factors and risk perception in safety management</li></ul> Course Highlights:<ul><li>Hands-on practice with risk assessment tools and techniques</li><li>Interactive exercises in developing risk control plans</li><li>Case studies analysis of real-world risk management scenarios</li><li>Group activities in creating comprehensive risk management plans</li><li>Practical application of relevant industry standards</li><li>Discussions on aligning risk management with overall safety programs</li></ul> This course is vital for professionals across various industries who are responsible for workplace safety and risk mitigation. Participants will gain essential skills to identify and evaluate hazards, implement effective control measures, and integrate risk management principles into their organization's safety culture. Upon completion, participants will be able to confidently apply risk management techniques, use industry-standard tools, and contribute to the development and improvement of their organization's safety management system through effective risk management practices.

Risk Management

Comprehensive Respiratory Protection Program This intensive 8-hour course provides thorough training on respiratory protection in the workplace. Designed for safety managers, industrial hygienists, supervisors, and employees who work in environments with potential respiratory hazards, this course equips participants with the knowledge and skills to implement and maintain an effective respiratory protection program in compliance with OSHA standards. Key Topics:<ul><li>Identification of common respiratory hazards and their health effects</li><li>OSHA Respiratory Protection Standard requirements</li><li>Types of respirators and selection criteria</li><li>Proper use, cleaning, and storage of respirators</li><li>Medical evaluation process for respirator use</li><li>Fit testing procedures and user seal checks</li><li>Development and management of a written respiratory protection program</li></ul> Course Highlights:<ul><li>Hands-on practice with various types of respirators</li><li>Interactive exercises in respirator selection based on workplace hazards</li><li>Practical demonstrations of donning, doffing, and user seal checks</li><li>Guided sessions on cleaning and maintaining respirators</li><li>Simulated fit testing procedures</li><li>Case studies on respiratory protection in different industries</li><li>Group activities in developing elements of a respiratory protection program</li></ul> This course is essential for professionals in industries where respiratory hazards are present, including manufacturing, construction, healthcare, and emergency services. Participants will gain crucial skills to protect themselves and their colleagues from respiratory hazards, ensure proper use and maintenance of respiratory equipment, and maintain compliance with OSHA regulations. Upon completion, participants will be able to confidently select appropriate respirators, demonstrate proper use and care, understand the importance of medical evaluations and fit testing, and contribute to the development and implementation of an effective respiratory protection program in their workplace.

Respiratory Protection

OSHA Recordkeeping and Reporting Requirements (4 Hours) This focused 4-hour course provides thorough training on OSHA's recordkeeping and reporting requirements. Designed for safety managers, human resources professionals, supervisors, and those responsible for maintaining workplace injury and illness records, this course equips participants with the knowledge and skills to accurately record, report, and analyze workplace safety data. Key Topics:<ul><li>OSHA's recordkeeping standards (29 CFR 1904)</li><li>Determining recordable injuries and illnesses</li><li>Proper completion of OSHA 300, 300A, and 301 forms</li><li>Electronic submission requirements and processes</li><li>Privacy concerns and legal considerations in recordkeeping</li><li>Analyzing recordkeeping data to improve workplace safety</li><li>Fatality and severe injury reporting procedures</li></ul> Course Highlights:<ul><li>Practical exercises in determining recordability using real-world scenarios</li><li>Hands-on practice completing OSHA forms</li><li>Interactive sessions on electronic submission requirements</li><li>Group activities in analyzing safety data and identifying trends</li><li>Case studies on proper recordkeeping and reporting practices</li><li>Guided practice in using the OSHA recordkeeping decision tree</li></ul> This course is essential for professionals responsible for maintaining OSHA records in any industry covered by OSHA recordkeeping requirements. Participants will gain valuable skills to ensure compliance with OSHA standards, accurately track workplace injuries and illnesses, and use this data to enhance safety programs. Upon completion, participants will be able to confidently navigate OSHA's recordkeeping requirements, maintain accurate records, submit reports correctly and on time, and leverage recordkeeping data to drive safety improvements in their workplace.

Record Keeping

Effective Use and Management of Personal Protective Equipment (PPE) This focused 4-hour course provides essential training on the selection, use, maintenance, and limitations of personal protective equipment (PPE) in the workplace. Designed for workers, supervisors, and safety professionals across various industries, this course equips participants with the knowledge and skills to effectively use and manage PPE, enhancing personal safety and regulatory compliance. Key Topics: <ul><li>Importance of PPE in workplace safety and the hierarchy of controls</li><li>Types of PPE: head, eye, face, hearing, respiratory, hand, foot, and body protection</li><li>Conducting PPE hazard assessments</li><li>Proper selection of PPE based on workplace hazards</li><li>Correct use, adjustment, and removal of various PPE</li><li>Maintenance, storage, and disposal of PPE</li><li>OSHA standards and requirements related to PPE</li></ul> Course Highlights: <ul><li>Hands-on demonstrations with various types of PPE</li><li>Practical exercises in conducting PPE hazard assessments</li><li>Interactive sessions on selecting appropriate PPE for different scenarios</li><li>Group activities in proper donning and doffing procedures</li><li>Real-world case studies illustrating the importance of proper PPE use</li><li>Guided practice in PPE inspection and maintenance</li></ul> This course is vital for professionals in construction, manufacturing, healthcare, laboratory settings, and any industry where personal protective equipment is crucial for worker safety. Participants will gain valuable skills to select, use, and maintain PPE effectively, ensuring maximum protection against workplace hazards. Upon completion, participants will be able to confidently assess PPE needs, select appropriate equipment, demonstrate proper use and care of PPE, and contribute to a safer work environment through effective PPE management.

Personal Protective Equipment

Safe Material Handling Techniques and Equipment Operation This in-depth 6-hour course provides essential training on safe material handling practices, proper lifting techniques, and the safe operation of material handling equipment. Designed for warehouse workers, manufacturing personnel, construction workers, and safety professionals, this course equips participants with the knowledge and skills to identify and mitigate risks associated with manual and mechanical material handling in various workplace settings. Key Topics:<ul><li>Common material handling hazards and injury prevention</li><li>Proper manual lifting, carrying, and team lifting techniques</li><li>Ergonomic principles in material handling tasks</li><li>Safe operation of material handling equipment (forklifts, pallet jacks, cranes)</li><li>Equipment inspection and maintenance procedures</li><li>Load handling, securement, and safe storage practices</li><li>Personal protective equipment for material handling tasks</li></ul> Course Highlights:<ul><li>Hands-on demonstrations of safe lifting techniques</li><li>Practical exercises in ergonomic assessment of workstations</li><li>Interactive sessions on material handling equipment inspection</li><li>Group activities in solving material handling scenarios</li><li>Real-world case studies of material handling incidents and preventive measure</li><li>Guided practice in interpreting load charts and planning safe lifts</li></ul> This course is vital for professionals in warehousing, manufacturing, construction, and any industry where material handling is a significant part of daily operations. Participants will gain valuable skills to implement safe material handling practices, operate equipment properly, and reduce the risk of musculoskeletal injuries. Upon completion, participants will be able to confidently apply safe material handling techniques, conduct basic equipment inspections, implement ergonomic solutions, and contribute to a safer, more efficient work environment in material handling operations.

Material Handling

Machine Guarding and Safe Operation Principles This intensive 6-hour course provides crucial training on machine guarding principles, safe machine operation, and hazardous energy control. Designed for machine operators, maintenance personnel, safety managers, and supervisors in manufacturing and industrial settings, this course equips participants with essential knowledge and skills to prevent machine-related accidents and injuries. Key Topics:<ul><li>Identification of common machine hazards in the workplace</li><li>OSHA machine guarding requirements and standards</li><li>Types of machine guards and their appropriate applications</li><li>Safe machine operation procedures and best practices</li><li>Lockout/tagout procedures for machine maintenance</li><li>Machine-specific safety considerations for various industries</li><li>Development of effective machine safety programs</li></ul> Course Highlights:<ul><li>Hands-on exercises in identifying appropriate guards for various machines</li><li>Practical demonstrations of safe machine start-up, operation, and shut-down procedures</li><li>Interactive sessions on applying lockout/tagout procedures</li><li>Group activities in developing machine-specific safety procedures</li><li>Case studies analysis of machine-related incidents and preventive measures</li><li>Guided practice in conducting basic machine safety inspections</li></ul> This course is vital for professionals working in manufacturing, woodworking, metalworking, and other industries where machinery poses significant safety risks. Participants will gain valuable skills to implement effective machine guarding, operate machinery safely, and ensure compliance with OSHA standards. Upon completion, participants will be able to confidently identify machine hazards, apply appropriate guarding techniques, implement safe operating procedures, and contribute to a safer work environment in machine-intensive industries.d skills to operate machinery safely, ensuring compliance with OSHA standards and reducing the risk of injuries.

Machine Operation

Lockout/Tagout and Hazardous Energy Control This essential 4-hour course provides thorough training on lockout/tagout procedures and the control of hazardous energy sources. Designed for maintenance personnel, operators, supervisors, and safety professionals, this course equips participants with the knowledge and skills to prevent accidents and injuries during equipment maintenance and servicing. Key Topics:<ul><li>Purpose and importance of lockout/tagout procedures</li><li>Types of hazardous energy sources and their identification</li><li>OSHA's Control of Hazardous Energy standard requirements</li><li>Proper selection and use of lockout/tagout devices</li><li>Roles and responsibilities in a lockout/tagout program</li><li>Special situations: group lockout, shift changes, and contractor coordination</li><li>Developing and implementing an effective lockout/tagout program</li></ul> Course Highlights:<ul><li>Hands-on practice with various lockout/tagout devices</li><li>Interactive exercises in performing lockout/tagout procedures</li><li>Role-playing scenarios to reinforce proper communication</li><li>Group activities in developing lockout/tagout procedures</li><li>Practical demonstrations of energy isolation and verification</li><li>Case studies analysis of lockout/tagout-related incidents</li></ul> This course is crucial for professionals in manufacturing, construction, maintenance, and any industry where the control of hazardous energy is necessary. Participants will gain vital skills to implement safe work practices, protect themselves and colleagues during equipment servicing, and ensure compliance with OSHA standards. Upon completion, participants will be able to confidently apply lockout/tagout procedures, recognize and control various energy sources, and contribute to a safer work environment during equipment maintenance and repair operations.

Lock-out Tag-out

Ladder Safety: Selection, Use, and Maintenance This focused 3-hour course provides essential training on the safe use, selection, and maintenance of various types of ladders in the workplace. Designed for construction workers, maintenance personnel, facility managers, and safety professionals, this course equips participants with the knowledge and skills to prevent ladder-related accidents and injuries. Key Topics:<ul><li>Types of ladders and their appropriate uses</li><li>OSHA requirements for ladder safety</li><li>Proper ladder setup, use, and climbing techniques</li><li>Common ladder hazards and mitigation strategies</li><li>Thorough ladder inspection procedures</li><li>Proper ladder storage and maintenance practices</li></ul> Course Highlights:<ul><li>Hands-on demonstrations with various ladder types</li><li>Interactive exercises in ladder setup and safe use</li><li>Practical sessions on conducting ladder inspections</li><li>Group discussions on identifying ladder hazards in workplace scenarios</li><li>Real-world case studies of ladder-related incidents and lessons learned</li><li>Final quiz to reinforce key learning points</li></ul> This course is crucial for professionals in construction, facilities management, warehousing, and general industry where ladders are frequently used. Participants will gain valuable skills to select appropriate ladders for specific tasks, use them safely, conduct thorough inspections, and maintain ladders properly. Upon completion, participants will be able to implement effective ladder safety practices in their workplace, significantly reducing the risk of ladder-related accidents and ensuring compliance with OSHA standards.

Ladders

H₂S Hazard Awareness and Safety Procedures This intensive 6-hour course equips participants with essential knowledge and skills for working safely in hydrogen sulfide (H₂S) prone environments. Designed for oil and gas workers, industrial hygienists, emergency responders, and safety professionals, the course covers ₂S properties, health effects, detection methods, safety measures, and emergency response procedures. Key Topics: <ul><li>Physical and chemical properties of H₂S</li><li>Potential sources of H₂S in industrial settings</li><li>Health effects of H₂S exposure at various concentrations</li><li>H₂S detection and monitoring techniques</li><li>Proper use of personal protective equipment (PPE) in H₂S environments</li><li>Safe work practices and engineering controls</li><li>Emergency response and rescue procedures for H₂S incidents</li></ul> Course Highlights: <ul><li>Hands-on practice with H₂S detection and monitoring equipment</li><li>Interactive exercises in PPE selection, donning, and doffing</li><li>Simulated H₂S release scenarios and emergency response drills</li><li>Case studies analysis of real-world H₂S incidents</li><li>Practical demonstrations of rescue techniques in H₂S environments</li><li>Group discussions on job hazard analysis for H₂S work</li></ul> This course is vital for professionals working in industries where H₂S exposure is a risk, including oil and gas production, wastewater treatment, paper and pulp processing, and chemical manufacturing. Participants will develop critical skills to work safely in H₂S-prone environments, protect themselves and their colleagues, and respond effectively to H₂S-related emergencies. Upon completion, participants will be able to identify H₂S hazards, use detection equipment properly, implement appropriate safety measures, and execute emergency procedures confidently and effectively.

Hydrogen Sulfide (H₂S)

Hazard Communication and GHS: Understanding Chemical Safety in the Workplace This 4-hour course provides essential training on the Globally Harmonized System (GHS) of Classification and Labeling of Chemicals and OSHA's Hazard Communication Standard. Designed for employees at all levels who work with or around chemicals, safety managers, and supervisors, this course equips participants with the knowledge and skills to identify chemical hazards, interpret safety information, and implement proper safety measures in the workplace. Key Topics:<ul><li>OSHA's Hazard Communication Standard and its key elements</li><li>Globally Harmonized System (GHS) and its impact on hazard communication</li><li>Types of chemical hazards and their potential health effects</li><li>Interpreting Safety Data Sheets (SDS) and GHS-compliant labels</li><li>Understanding GHS pictograms and hazard statements</li><li>Implementing appropriate protective measures for chemical safety</li><li>Employee rights and employer responsibilities under the Hazard Communication Standard</li></ul> Course Highlights:<ul><li>Hands-on practice interpreting Safety Data Sheets and chemical labels</li><li>Interactive exercises in identifying GHS pictograms and their meanings</li><li>Group discussions on real-world chemical hazard scenarios</li><li>Practical demonstrations of proper PPE use for chemical safety</li><li>Case studies analysis of chemical-related workplace incidents</li></ul> This course is vital for professionals in industries where chemicals are present, including manufacturing, laboratories, healthcare, construction, and general industry. Participants will gain crucial skills to work safely with chemicals, understand hazard communication tools, and contribute to a safer work environment while ensuring compliance with OSHA regulations.

Hazard Communication & GHS

Fire Prevention and Emergency Response This essential 4-hour course provides crucial knowledge and skills for fire prevention, protection, and emergency response in the workplace. Designed for employees at all levels, safety managers, and emergency response team members, this course equips participants with the ability to identify fire hazards, implement prevention strategies, use fire extinguishers correctly, and conduct safe evacuations. Key Topics:<ul><li>Fire behavior and the fire triangle concept</li><li>Common fire hazards in various work environments</li><li>Effective fire prevention strategies and good housekeeping practices</li><li>Types of fire protection systems and their maintenance</li><li>Proper use of portable fire extinguishers (PASS technique)</li><li>Key components of emergency action plans</li><li>Safe evacuation procedures and routes</li><li>Conducting workplace fire safety inspections</li></ul> Course Highlights:<ul><li>Hands-on practice with fire extinguisher training simulators</li><li>Interactive exercises in identifying fire hazards in workplace scenarios</li><li>Practical walkthrough of evacuation procedures</li><li>Group activities in developing and reviewing emergency action plans</li><li>Real-world case studies of workplace fire incidents and lessons learned</li></ul> This course is vital for professionals in all industries, particularly those in manufacturing, healthcare, hospitality, and office environments. Participants will gain essential skills to prevent fires, respond effectively to fire emergencies, and ensure the safety of themselves and their colleagues in the event of a fire incident.

Fire Safety

Fall Protection Essentials This 2-hour course provides construction workers with crucial knowledge and skills to prevent fall-related accidents and comply with OSHA standards. Participants will gain an understanding of fall hazards, protective equipment, and safe work practices. Key Topics:<ul><li>Common fall hazards in construction and their statistics</li><li>OSHA fall protection standards and employer/employee responsibilities</li><li>Fall protection systems and equipment (guardrails, safety nets, personal fall arrest systems)</li><li>Equipment inspection and maintenance</li><li>Safe work practices for various construction activities</li></ul> Course Highlights:<ul><li>Practical demonstrations and hands-on exercises</li><li>Real-world case studies and local incident discussions</li><li>Interactive Q&amp;A sessions</li></ul> Ideal for new construction workers or those needing a refresher, this course emphasizes the critical role of fall protection in ensuring workplace safety.

Fall Protection Essentials

Safe Practices for Excavation and Trenching Operations This 6-hour course provides essential training on safety practices for excavation and trenching operations. Designed for construction workers, site supervisors, competent persons, and safety professionals, this course equips participants with the knowledge and skills to identify and mitigate hazards associated with excavation work, understand soil mechanics, and implement proper protective systems in compliance with OSHA standards. Key Topics:<ul><li>Common hazards in excavation and trenching operations</li><li>OSHA's Excavation standard (29 CFR 1926 Subpart P)</li><li>Soil mechanics and classification techniques</li><li>Selection and implementation of appropriate protective systems</li><li>Roles and responsibilities of the competent person</li><li>Proper inspection procedures for excavation sites</li><li>Hazard control measures for various excavation risks</li><li>Emergency response and rescue considerations</li></ul> Course Highlights:<ul><li>Hands-on practice with soil testing equipment</li><li>Interactive exercises in soil classification and protective system selection</li><li>Case studies analysis of excavation and trenching incidents</li><li>Group activities in developing excavation safety plans</li><li>Role-playing exercises for conducting competent person inspections</li><li>Practical demonstrations of safe work practices around excavations</li></ul> This course is essential for professionals involved in construction, utility work, and any industry where excavation and trenching operations are performed. Participants will gain crucial knowledge and skills to ensure safe excavation practices, implement effective protective measures, and comply with OSHA regulations, ultimately enhancing workplace safety in excavation and trenching activities.

Excavation and Trenching

Ergonomics Principles for Workplace Safety and Health This practical 4-hour course provides an overview of ergonomics principles and their application in the workplace. Designed for safety professionals, supervisors, and employees across various industries, this course equips participants with the knowledge and skills to identify ergonomic risk factors, conduct basic assessments, and implement effective solutions to reduce the risk of musculoskeletal disorders. Key Topics: <ul><li>Fundamentals of ergonomics and its importance in workplace safety</li><li>Common ergonomic risk factors in various work environments</li><li>Basic principles of ergonomics and their application</li><li>Ergonomic assessment techniques and tools</li><li>Implementing ergonomic solutions and interventions</li><li>Office and industrial ergonomics considerations</li><li>Developing and managing an effective ergonomics program</li></ul> Course Highlights: <ul><li>Hands-on practice with ergonomic assessment tools (e.g., RULA, NIOSH Lifting Equation)</li><li>Interactive exercises in conducting basic ergonomic assessments</li><li>Practical demonstrations of proper workstation setup and adjustments</li><li>Case studies analysis of ergonomic improvements in real-world scenarios</li><li>Group activities in developing ergonomic solutions for given workplace situations</li></ul> This course is valuable for professionals in office environments, manufacturing, healthcare, and any industry where ergonomic concerns are present. Participants will gain practical skills to enhance workplace ergonomics, reduce the risk of musculoskeletal disorders, and improve overall employee well-being and productivity.

Ergonomics

Electrical Safety in the Workplace This intensive 6-hour course provides essential knowledge and skills for recognizing, evaluating, and controlling electrical hazards in the workplace. Designed for electricians, maintenance personnel, safety managers, and employees working around electrical equipment, this course covers crucial aspects of electrical safety to prevent accidents and ensure compliance with OSHA standards. Key Topics:<ul><li>Basic electrical theory and terminology</li><li>Common electrical hazards identification and mitigation</li><li>OSHA electrical safety standards and requirements</li><li>Lockout/tagout procedures for electrical equipment</li><li>Safe work practices for energized and de-energized work</li><li>Selection and proper use of electrical Personal Protective Equipment (PPE)</li><li>Approach boundaries for live parts</li><li>Emergency response to electrical incidents</li></ul> Course Highlights:<ul><li>Hands-on practice with electrical safety equipment (e.g., voltage testers, insulated tools)</li><li>Interactive exercises in implementing lockout/tagout procedures</li><li>Practical demonstrations of proper PPE selection and use</li><li>Group activities in identifying electrical hazards in workplace scenarios</li><li>Real-world case studies of electrical accidents and lessons learned</li></ul> This course is essential for professionals working in industries where electrical hazards are present, including construction, manufacturing, and facilities management. Participants will gain crucial knowledge and skills to work safely around electrical equipment, implement proper safety procedures, and respond appropriately to electrical emergencies, ultimately enhancing workplace safety and OSHA compliance.

Electrical Safety

Safe Operations in Crane and Rigging Activities This intensive 8-hour course provides training on the safe operation of cranes and implementation of proper rigging techniques. Designed for crane operators, riggers, signal persons, and supervisors, this course covers essential knowledge and skills to prevent accidents and injuries related to crane and rigging operations while ensuring compliance with OSHA standards. Key Topics:<ul><li>Types of cranes, components, and their applications</li><li>OSHA's Cranes and Derricks in Construction standard</li><li>Crane hazards and risk mitigation strategies</li><li>Load chart interpretation and basic load calculations</li><li>Rigging principles, equipment selection, and inspection</li><li>Proper rigging techniques and safe working load limits</li><li>Crane inspection procedures (daily, monthly, annual)</li><li>Lift planning and execution</li><li>Special considerations (multiple crane lifts, critical lifts)</li><li>Operator qualification and certification requirements</li></ul> Course Highlights:<ul><li>Interactive exercises in load chart interpretation and calculations</li><li>Practical demonstrations of proper rigging techniques</li><li>Group activities in developing lift plans</li><li>Real-world case studies of crane-related incidents and lessons learned</li></ul> This course is essential for professionals involved in crane operations across construction, manufacturing, and logistics industries. Participants will gain crucial knowledge and skills to operate cranes safely, implement proper rigging practices, and comply with OSHA regulations, ultimately enhancing workplace safety in crane-related activities.

Cranes and Rigging

Confined Space Entry and Rescue Procedures This 6-hour course provides essential training on confined space hazards, entry procedures, and rescue techniques. Designed for workers who enter confined spaces, supervisors, and rescue team members, this course equips participants with the knowledge and skills to safely work in and around confined spaces while complying with OSHA standards. Key Topics:<ul><li>Defining confined spaces and permit-required confined spaces</li><li>Identifying and evaluating confined space hazards</li><li>OSHA's Confined Spaces standard requirements</li><li>Proper confined space entry procedures and permit systems</li><li>Atmospheric testing and monitoring techniques</li><li>Ventilation methods and equipment</li><li>Roles and responsibilities of entry team members</li><li>Basic confined space rescue procedures and equipment</li></ul> Course Highlights:<ul><li>Hands-on practice with confined space entry equipment</li><li>Interactive exercises in completing entry permits</li><li>Role-playing scenarios to reinforce team member responsibilities</li><li>Practical demonstrations of basic rescue techniques</li><li>Real-world case studies of confined space incidents and lessons learned</li></ul> This course is ideal for workers in industries such as construction, manufacturing, utilities, and maintenance services where confined space entry is required. Participants will gain the expertise to identify confined space hazards, implement proper entry procedures, and understand basic rescue techniques, ensuring workplace safety and OSHA compliance.

Confined Space Operator

Accident Investigation and Root Cause Analysis This 6-hour course equips participants with the essential skills to conduct thorough accident investigations and perform root cause analysis. Designed for safety professionals, supervisors, and team leaders, this course provides practical techniques for gathering evidence, interviewing witnesses, and developing effective corrective actions to prevent future incidents. Key Topics:<ul><li>Accident investigation process and best practices</li><li>Evidence gathering and scene preservation techniques</li><li>Effective witness interviewing strategies</li><li>Root cause analysis methods (5-Why, Fishbone Diagram, Fault Tree Analysis)</li><li>Causal factor determination and common pitfalls</li><li>Developing and implementing corrective actions</li><li>Writing clear and concise investigation reports</li></ul> Course Highlights:<ul><li>Hands-on practice with root cause analysis tools</li><li>Interactive mock witness interview exercises</li><li>Case study analysis of complex accident scenarios</li><li>Group projects on developing investigation reports</li><li>Application of the hierarchy of controls for corrective actions</li></ul> This course is ideal for professionals responsible for workplace safety, incident response, and continuous improvement initiatives. Participants will gain the expertise to conduct comprehensive accident investigations, uncover root causes, and implement effective preventive measures, ultimately enhancing workplace safety and reducing incident recurrence.

Accident Investigation

American Red Cross Wilderness First Aid This 16-hour course provides essential wilderness first aid skills for outdoor enthusiasts, adventure guides, and anyone who works or plays in remote areas. Designed to prepare participants for emergency situations in settings where advanced medical care may be hours or days away, this hands-on course combines classroom learning with realistic scenario-based training. Key Topics:<ul><li> Wilderness first aid basics and emergency action principles</li><li>Patient assessment in remote environments</li><li>Trauma management (wounds, burns, fractures, spinal injuries)</li><li>Environmental emergencies (heat exhaustion, hypothermia, altitude sickness)</li><li>Medical emergencies in the wilderness</li><li>Evacuation decision-making and improvised transport techniques</li><li>Survival skills and emergency signaling</li></ul> Course Highlights:<ul><li>Hands-on practice with first aid techniques adapted for wilderness settings</li><li>Realistic outdoor scenarios to simulate remote emergencies</li><li>Practice with improvised materials and limited resources</li><li>Focus on long-term patient care and monitoring</li><li>Emphasis on prevention and risk assessment in outdoor activities</li><li>Interactive discussions on real-world wilderness emergency case studies</li></ul> This course is vital for hikers, climbers, kayakers, ski patrollers, search and rescue teams, outdoor educators, and anyone who ventures into backcountry areas. Participants will gain the confidence and skills to respond effectively to emergencies in remote locations where professional medical help is not readily available. Note: This course includes both classroom and outdoor components. Participants should be prepared for outdoor activities in various weather conditions. Upon successful completion, participants will receive American Red Cross Wilderness First Aid certification valid for two years.

Wilderness First Aid

Empower yourself with the skills to save lives! Our comprehensive Adult and Pediatric First Aid/CPR/AED course equips you with the knowledge and confidence to respond effectively in emergency situations involving both adults and children.Course Overview:– Duration: 3 hours– Certification: Valid for 2 years upon successful completionWhat You’ll Learn:1. First Aid Basics– Assessing emergency situations– Treating cuts, burns, and sprains– Managing sudden illnesses2. CPR Techniques– Adult CPR– Child CPR– Infant CPR3. AED Usage– Proper operation of Automated External Defibrillators– AED safety precautions4. Pediatric-Specific Care– Addressing choking in infants and children– Pediatric wound careWhy Choose This Course:– Hands-on practice with expert instructors– Updated with the latest emergency cardiovascular care (ECC) guidelines– Applicable for workplace safety, caregivers, and general publicGain the skills to make a difference when it matters most. Sign up today and be prepared for tomorrow’s emergencies!

Broadway Media Center

Adult and Pediatric First Aid/CPR/AED

American Red Cross Basic Life Support (BLS) Course Enhance your lifesaving skills with the American Red Cross Basic Life Support (BLS) course. This comprehensive program is designed for healthcare professionals and other personnel who need to know how to perform CPR and other basic cardiovascular life support skills in a wide variety of in-facility and prehospital settings. Course Overview:<ul><li>Duration: Typically 4.5 hours (may vary based on delivery method)\</li><li>Certification: 2-year BLS certification upon successful completion</li></ul> Key Learning Objectives:<ol><li>High-quality CPR for adults, children, and infants</li><li>Use of an Automated External Defibrillator (AED)</li><li>Effective ventilations using a barrier device</li><li>Importance of teams in multi-rescuer resuscitation</li><li>Relief of foreign-body airway obstruction (choking)</li></ol> Course Content:<ul><li>Critical concepts of high-quality CPR</li><li>The American Heart Association Chain of Survival</li><li>1-rescuer CPR and AED for adult, child, and infant</li><li>2-rescuer CPR and AED for adult, child, and infant</li><li>Differences between adult, child, and infant rescue techniques</li><li>Bag-mask techniques for adult, child, and infant</li><li>Rescue breathing for adult, child, and infant</li><li>Relief of choking for adult, child, and infant</li></ul> This course is ideal for:<ul><li>EMS personnel</li><li>Physicians and nurses</li><li>Dentists</li><li>Respiratory therapists</li><li>Physical and occupational therapists</li><li>Physician's assistants</li><li>Residents and fellows</li><li>Medical or nursing students</li></ul> Gain the skills and confidence to respond effectively in cardiac arrest and other respiratory emergencies. Join us for this essential training that can help you save lives in your professional setting and beyond.